TAIWAN NITTA FILTER
 HOME>NEWPRDUCTS> PASSIVE TYPE ABSORBENT
manufacture products
air filter
Medium Filter
HEPA
ULPA
Low Boron &
Low Organic Compounds

chemical filter
clean system
process belt
sales products
beltConveyor &
Transmission
PolySprint
tubeTUBE
FITTING
Hose &Couplings
UNITHERM
adhesive tapes
unitherm
unitherm
image

Passive Type Absorbent

Feature

It can be placed anywhere in the shipping container to remove harmful gases.

Large surface powdered active carbon wrapped with low outgas PTFE nonwoven fabric to achieve low dust emission and permeability exceeding ULPA filter standard

・Outstanding absorbent
・Low dust emission
・Low outgas

Made in small parcel, able to be placed anywhere



Structure

Large surface powdered active carbon that has outstanding permeability, which was wrapped with low outgas PTFE nonwoven fabric resulted in low dust emission.



Size(mm)
Weight(g)
Dust Emissin(dust/cf)≧0.1μm
※Please refer to below experiment condition
H
W
11.5
<0.1
100
84

Performance

Test Result for absorbent

The change in concentration is measured by putting one bag of passive type absorbent
into a 10L sealed container.


Dust Emission Test Result

One piece passive type absorbent is put in a clean duct for test. (At air velocity of 0.3m/s)
Due to the initial trapped dusts on the wrap, data for the first 60 minutes was not counted. 


TAIWAN NITTA FILTER CO., LTD.
Head office : Chia Hsin Building 10 Fl., Room No. 1005, 96 Chung Shan N. Rd., Sec. 2, Taipei, Taiwan, R. O. C.
TEL :+886-2-2581-6296 FAX :+886-2-2563-4900
Factory : 2-1, Industrial 2nd Rd, Pinchen Industrial Park, Taoyuan. Taiwan. R.O.C.
TEL :+886-3-469-7551 FAX :+886-3-469-0260
http://www.nitta.com.tw